#Arma 3 ace 3 tutorial update
#Arma 3 ace 3 tutorial software

Now equip your AtragMX in your ACE3 interaction menu, in your equipmet slot and it will appear on your screen like below: Remember this !! its best to write it down. Target inclination.Д®quip your rangefinder and range the target as shown below: Range target 2.Open kestrel 3.Open AtragMX 4.Range adjustments 5.Wind adjustments 6.Temprature adjustments 7.Humidity adjustments. You MUST remember to CLICK :DONE/OK/ENTER, AFTER EACH OR ANY ACTION ON THE AtragMX ! and you MUST be LOOKING/FACING at the target area when making calculations.ДЎ. Procedure Firstly this is the procedure you will take to effectivly range, adjust and kill a target followed by the methods in which to do so.

The original ACE3 GunList will be restored (all Add New Gun entries deleted).This is a guide to using the sniper system in ace 3 typically the kestrel and the AtragMX.

Execute call ace_atragmx_fnc_clear_user_data (LOCAL EXEC).

Open the Eden Editor and the Extended Debug Console (Ctrl+D).

#Arma 3 ace 3 tutorial software

Note: The ballistic coefficient can be calculated by using the 360 Degree Training Course mission as a chronograph at different distances and JBM Ballistics Calculators for example, an another ballistic software at your own convenience, or the AtragMx Truing Tool.Д®xample direct conversion with.

G7 ballistic coefficient can be converted, for example, with the online JBM Ballistics Calculators.

The AtragMx accepts only G1 ballistic coefficient.

The C1 coefficient of the bullet can be found with the Eden Editor Config Viewer:Д¬onfigfileВ В» вЂњCfgAmmoвЂќВ В» вЂњ bullet Class NameвЂќВ В» вЂњACE_ballisticCoefficientsвЂќД¬onfigfileВ В» вЂњCfgAmmoвЂќВ В» вЂњ bullet Class NameвЂќВ В» вЂњACE_dragModelвЂќ.

Edit manually the Muzzle Velocity Table according with the Range Card and Done.

Open the Muz Vel Table in the Options menu or click on MV in the Gun column.

#Arma 3 ace 3 tutorial update

Open the Gun column, check and update the Bullet Weight (grains), the Bullet Diam (inches) and Done.

Open the Range Card and check the bullet diameter, the bullet weight, the (bullet Class Name) and the muzzle velocities.

Open the Gun column, check and update the Zero Range and Done.

In this case, the Range Card will be automatically updated, NOT the AtragMx.

The Default zero distance can be overwritten with the Scopes Options, the Scopes Framework or the CBA Settings System.

If a new Target Range is applied in the Target column, the ballistic coefficient C1 and the elevation Elev will be automatically recalculated.ДЈ.4 Example with overwritten zero distance.

The Drag Coefficient Table will be automatically updated.

Accept the new C1, Gun column and Elev are updated.

Apply the actual scope elevation in the Drop field and Calc.

Add the same Target Range in the SUB column and Calc.

Add the actual Target Range in the SUPER column and Calc.

Open the Truing Drop in the Options menu.

Apply the vertical and horizontal elevations on the scope.

The latitude for all common maps can be found in the ACE3 Github.

Update the Target column (the wind arrow will also help).

Check the new Muzzle Velocity in the Gun column.

Update the Atmsphr column with the Kestrel 4500 and Done.

Optionally, Save Gun and Done in the GunList.

(Must be edited manually for specific cartridges according with the range card).

The Muzzle Velocity Table will be automatically updated.

Open the Gun column, check and update the Muzzle Velocity, the Zero Range and Done.

Select M (Metric unit) at the top right.

Open the Gun column, check and update the Bore, the Rifle Twist and Done.

Select E (English unit) at the top right.

Open Gun the 7.62x51mm M80 in the GunList.

Open the AtragMx and the Atmsphr column, select Default and Done.

Open the Range Card and check the cartridge, the zeroed distance, the rifle twist, the muzzle velocity at 15вЊ and the bore height.OPTIONS / CONTROLS / CONFIGURE ADDONS / ACE3 EquipmentДЈ.2 Example with M14 and default 7.62mm 20Rnd Mag.Open the self interaction menu Ctrl + вЉћВ Win.

Usage 3.1 Opening the AtragMx 3.1.1 Interaction Menu The Recon meets the rigorous MIL-STD-810F military standard for drops, vibration, humidity, altitude and extreme temperatures. ATragMX, loaded on a handheld computer made by TDS Recon, is easy to use and lightning-fast. Horus ATragMX software considers atmospheric conditions, gun data, ammunition, range, speed and muzzle velocity to calculate precise aiming solutions with вЂњcome-upвЂќ results вЂ“ and even accounts for Coriolis and spin drift effects.